Loading...
Latest News / Installation Guide LED Strips
Installation Guide LED Strips
![]() |
![]() |
![]() |
![]() |
|||
Dry the position to be flat and smooth before putting on the strips | LED Tape can be cut only between soldering pads. | Solder wires on soldering pads (label +/-). The solder temperature may not exceed 350°C for max. duration of 2s. | You can also connect strips using LED tape connectors. | |||
------------------------------------------------------------------------------------------------------ | ||||||
![]() |
![]() |
![]() |
![]() |
|||
LED tapes are bendable. Min. bend radius is 30mm | LED tapes cannot be bent or twisted in the demostrated directions. | Remove the adhesive tape from the back side of the LED tape. | Press the LED tape gently between the electronic components to stick it to the surface. Avoid pressing electronic components. | |||
------------------------------------------------------------------------------------------------------ | ||||||
![]() |
![]() |
|||||
Keep the LED Tape on the reel while applying in onto the surface. Remove the adhesive tape and apply while unrolling the reel at the same time. | ||||||