MY BASKET 0
Recently Added Items
Cart 0
Loading...
1
2
3
4
5
6
7
8
9
10
Page Search:
1 - 2
/
Product Search
Search catalogue ...
Search term found on 0 pages...

Solutions / LED Cove Lighting

LED COVE LIGHTING

How to install LED strip lights on drop-down ceilings

To get the very best effect from your LED feature lights, you’ll need to think about the best placement.




Drop-down ceilings are a kind of decorative ceiling feature, suspended so they sit lower than the main (structural) ceiling around the centre of the room, and leaving a gap around the edge of the wall. Also known as false ceilings, drop ceilings and suspended ceilings, they’re an excellent location for LED feature lighting.
The design of drop-down ceilings can vary, but they’re typically suspended with a drop of around 10cm-15cm, and the same distance from the surrounding walls.

When installing your strip lights, there are two options for positioning the LED tape:

1. LED tape can be fitted horizontally, facing upwards. (fig 1)
2. Or LED tape can be fitted vertically, facing sideways. (fig 2)


Which ever you choose, the essential key to an effective LED installation is to make sure the LEDs are located behind a lip, at the edge of your drop-ceiling. The lip should be higher than the LED tape (say 15mm at least). This will give a much better effect – by hiding the LEDs themselves, so you’ll see only their light and not the light-source.
If you choose to fit horizontally, it’s best to stick the LED as close as possible behind the lip of the drop-ceiling, in order to avoid light-dots shining on the vertical surface behind.



How to install LED strip lights on coving and cornices

Coving comes in all shapes and sizes. Generally it refers to decorative mouldings located at the junction between walls and ceilings. Hollow coving creates a great location to install LED highlights.




If you are fitting/moulding your own coving, you can choose how far down from the ceiling you want it. Once your coving is in place, a good tip for positioning your LED tape is to fix it as far from the back wall as you can, so as to avoid seeing visible light-dotting. (Try to fit it at least 50mm from the wall.)



How to install LED strip lights on plinths and kickboards

Plinths and kickboards (aka skirting) are usually already in place in kitchens and in other locations.

A few tips for LED installations:
Don’t position your LED tape too close to a wall, or else you may see lighting-dotting.
If possible, try to position your LEDs behind a lip, in order to hide the LED light source.
Be careful of the floor surface that the lights are going to fall on. Shining LED strip lights onto reflective floor tiles can create a reflection, which can sometimes be less attractive than a smooth wash effect.
For the very best effect, stick the LED tape behind a lip at the front edge of your plinth or kickboard, facing downwards.




How to install LED strip lights under kitchen cabinets and bathroom cabinets

By installing LED strips under your kitchen cabinets, you can create striking feature-light effects or more powerful task light for when you’re cooking.
As with other location, the best effect will be achieved if you can place your LEDs behind a lip (fig 6). But if you don’t have a lip on the cabinet, then a typical cabinet is usually deep enough to let you place the LEDs further back, out of sight (fig 7).



Either way, LEDs produce a wide beam of 120 degrees that will shine all the way to the back and front of your cabinet.
If your work-surface is shiny, be careful of unwanted reflections. If required, you can use our extrusions to diffuse your LEDs’ dotting effect.




Related Products